.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Dodge Ram 2500
Select the year of your Dodge Ram 2500:
If you're driving a 1999 Dodge Ram 3500 with a Dana 60 front axle, and your driveshaft is feeling a bit worn, check out this OE Driveshaft Assembly from USA Standard. It’s a solid replacement option that won’t break the bank. These guys make their parts right here in the USA, so you know you're getting something built to last.
This driveshaft measures in at a solid 32 13/16 inches from the center of the U-joint caps, which is just what you need for a proper fit. It’s designed specifically for the 5.9L diesel engine paired with the NV5600 manual transmission and NV 241 transfer case. So, if that’s your setup, you’re in luck—this is a direct replacement that will get you back on the road without any fuss.
One of the great things about this driveshaft is that it’s made from ASTM A513 DOM tubing. This means it’s built to withstand the rigors of daily driving and off-road adventures alike. Installation is straightforward too; it’s all new and OEM quality, so you won’t be dealing with any surprises when you put it in.
Here’s the rundown:
- Type: Front Driveshaft
- Length: 32 13/16 inches (measured from the center of the U-joint to the center of the furthest U-joint when collapsed)
- Compatibility: Fits 1999 Dodge Ram 3500 with a Dana 60 front end, 5.9L diesel, NV5600 manual transmission, and NV 241 transfer case
- Made in the USA
- Ready to install—no extra parts needed
And if you’re worried about longevity, this driveshaft comes with a limited lifetime warranty. That’s peace of mind right there. Whether you’re hauling heavy loads or just cruising around town, you can trust this driveshaft to keep your Ram running smoothly.
Fitment:
- Dodge Ram 2500: 2000-2002
- Dodge Ram 3500: 2000-2002
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
2000-2002 Dodge Ram 2500 |
Ram 2500 | 2000-2002 |
|
2000-2002 Dodge Ram 3500 |
Ram 3500 | 2000-2002 |
USA Standard Gear is a company that supplies high-quality parts for the automotive industry. They are a one-stop-shop for all your drivetrain component needs and have one of the industry's most comprehensive parts list and inventory. Today, they are considered the leading supplier of these parts in the United States.
Drivetrain ExpertsThe company offers various parts ranging from axles, differential gears, lockers, limited slips, drivelines, and more. It is built by a team of craftsmen who has years of experience when it comes to assembling and modifying their own builds. This passion is what drives the company to create some of the best products in the market.
Quality In Every ProductAll their parts are manufactured in their facility equipped with the latest and most sophisticated tools available today. They also have two high-tech testing labs to ensure that every product comes out with the company's quality.
The USA Standard Gear engineering team is constantly on edge trying to find ways to develop and further improve their products. That is why they can produce innovative parts that adapt to the changing trend in the automotive world.
Purchase USA Standard Gear at Vivid RacingIf you are in the market for reliable and top-notched drivetrain components, then USA Standard Gear is the brand for you. With years of experience developing their products, they have provided their customers with parts they could trust, whether it's a replacement component or an upgrade.
To know more about USA Standard Gear, visit Vivid Racing and check out their list of offerings that fit your specific requirement.
USA Standard Gear® ("USA Standard") warrants the original retail purchaser that all USA Standard products will be free from defects in materials and workmanship for the periods shown herein. USA Standard makes no other warranty of any kind, express or implied. All other warranties, including but not limited to an implied warranty of merchantability or fitness for a particular purpose, are excluded. This warranty is offered provided that the USA Standard product has been installed and maintained in accordance with USA Standard instructions, and that it has not been subject to modification, accident, abnormal use or misuse. At USA Standard's discretion, this warranty may be voided if installation of USA Standard product(s) occurs on vehicles with tires that exceed USA Standard Maximum Recommended Tire Size.
Upon notification of a warranty claim, USA Standard shall investigate the claim of defect, and, in the event of a verified defect, shall, at their sole choice, either repair the defective product or replace it.
This warranty does not cover, and USA Standard shall not be liable for, incidental or consequential damages, including loss of time, road service charges, labor charges, inconvenience, loss of vehicle use, loss of revenues, or loss or damage to personal property (including loss or damage to vehicle parts due to the failure of the USA Standard product). In addition, this warranty does not cover, and USA Standard shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling USA Standard Gear® products, except where such agreements are within the provisions of this Warranty statement. Also, this warranty does not cover damage to the axle caused by or facilitated by failure of a non-USA Standard component.
This agreement offers you specific legal rights. You may also have other rights which vary from state to state.
USA STANDARD GEAR® WARRANTY BY PRODUCT| USA Standard Product | Length of Warranty (From date of sale) | NOTES |
|---|---|---|
| Spool | As long as original purchaser owns vehicle in which Spool is originally installed | It is normal for Spools to cause tire chatter, squeal, or scrubbing when vehicle is not moving in a straight line. Both rear tires must measure the same height from ground to top of wheel for Spool to function properly without premature wear. |
| Rear Axle (1040/1050) | Five (5) Years | Covers parts for five years against manufacturing defects. |
| Front Axle (Series ZA W) | Five (5) Years | Five year warranty covering manufacturing defects and axle breakage. This warranty is not transferable to another party. “No Questions Asked†replacement for first warranty return, however, USA Standard Gear reserves the right to either replace axle or refund original purchase price after the first warranty claim. USA Standard Gear (through RANDYS Worldwide Automotive) makes final determination on warranty considerations. |
| Ring & Pinion Gear Set | One (1) Year | Warrantied against manufacturing defects for one (1) year. |
| Positraction Differential | One (1) Year | Exclusions apply, does not cover premature clutch wear or abuse. It is normal for Positraction differentials to cause tire chatter, squeal, or scrubbing when vehicle is not moving in a straight line. Both rear tires must measure the same height from ground to top of wheel for differential to function properly without premature wear. Limited slip additive or appropriate friction modifier must be used with oil to reduce Positraction chatter. |
| Spartan Locker | One (1) Year | Warrantied against manufacturers defects for one (1) year. |
| Install Kits | One (1) Year | Includes ZBK, ZPK, and ZK. Covers parts for one year against manufacturing defects. |
| Spider Gear Kits (ZIK) | One (1) Year | One year against manufacturing defects. Exclusions apply, does not cover clutch wear in limited slip differentials. |
| Replacement Driveshafts (ZDS) | One (1) Year | Warrantied against manufacturing defects for one (1) year. |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.