See more parts for BMW M5
Select the year of your BMW M5:
Product thumb
VRSF Competition HD Intercooler Upgrade BMW M5 | M6 2012-2017
$999.99
Replace your inefficient factory intercoolers with the VRSF Competition HD Intercooler Upgrade Kit to get the most out of your tuned S63. We designed this kit to be one of the best performing, direct bolt on intercoolers available for your BMW with special attention to quality and performance while maintaining a reasonable price. Our intercoolers allow for higher HP gains, mainly due to their ability to keep intake temps down while preventing heat soak which is a common problem with the factory intercoolers. This results in a more power and increased reliability with reduced chances of pre-detonation & knock.

The most important component of any intercooler is the core. The core cools the charged air from the turbo before it enters the engine and the OEM BMW tube and fin intercooler is designed to support low boost levels and air flow. Once boost levels and air flow are increased, the OEM intercoolers are easily overwhelmed and can not keep up with the cooling demands of a tune running more than OEM boost levels. This results in heat soak which will result in a power loss and a higher potential for pre-detonation in the upper RPM range.

We remedy this problem with our custom bar and plate core design which utilizes a staggered and offset high density internal and external fin pack. Our proprietary VRSF Competition HD core has been carefully tuned to provide the the best intake temperature reduction while maintaining minimal pressure drop along with our CFD optimized cast end tanks.

Every VRSF product includes our lifetime warranty & our "No Hassle" satisfaction guarantee which includes fitment & defects. Each VRSF intercooler is hand finished and pressure tested to ensure a high quality, leak free experience. These are also a great upgrade for those interested in upgrading from the leaky OEM intercoolers and they are a direct replacement for your factory intercooler and fully reversible. All required hardware is included.

This part replaces OEM BMW factory part numbers 17517843119 & 17517843123.


Features:
  • High density bar & plate core.
  • Over 50% larger overall capacity vs OEM.
  • Black powder coated finish.
  • CFD backed, cast aluminum plug and play end tanks.
  • Includes plugged 1/8" NPT Water Injection Bungs.
  • Plug and play with no modification required.
  • Compatible with any chargepipe available.


Fitment:
  • BMW F10 M5 S63/S63n/S63tu 2012-2017
  • BMW F12/F13 M6 S63/S63n/S63tu 2012-2017
  • BMW F06 M6 Gran Coupe S63/S63n/S63tu 2012-2017
Note:
  • Fits both Left Hand Drive & Right Hand Drive Models


Note:
  • Fits both Left Hand Drive & Right Hand Drive Models
Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Vehicle
2012-2017
BMW M5
2012-2017
BMW M6

Check out these other great products