See more parts for BMW X3
Select the year of your BMW X3:
Product thumb
VTT Carbon Fiber Driveshaft BMW X3 | X4M 2019-2025
$1999.99
Free Shipping
Why overpay for a custom BMW CF Driveshaft? VTT Is proud to offer our Carbon Fiber Driveshaft for many BMW Models made exclusively for us in the USA by PST one of the leading names n CF driveshaft technology! This driveshaft is made from 3.25" CF tubing Spicer 1350 Yolks, and U-Joints. All pieces are then bonded using PST's proprietary process, and balanced to within 1/8 In/Ounce. We couple the driveshaft with VTT Custom 7075 aluminum adapters which completely eliminate any extra guibos etc. These shafts connect directly to the BMW 3 bolt flange, and our 4340 adapter in the rear to get rid of the screw in the shaft. Made in the USA

PST uses its extensive experience to produce world-class carbon fiber components. We maximize torsional strength by using two different wind angles during the manufacturing process. This technique creates a driveshaft with less stress on the driveline.

SFI Certification: These carbon fiber driveshafts can be SFI certified. If your plans require SFI certification, be sure to request this when ordering.

Kit Includes:
  • 1 VTT/PST CF Driveshaft with attached VTT 7075 adapters
  • 1 VTT 4340 Rear End Adapter
  • 1 VTT Billet Adapter installation Tool
  • 1 BMW Nut Repair kit
  • 6 M8 Rear CV joint bolts (E9X, E46 M3 only)
  • 3 M10 Rear flange bolts
  • 3 M10 front flange bolts
  • 1 Small tube of Loc-tite medium thread locker


Features:
  • The shaft is bonded to an exclusive-design 7075 forge aluminum tube yoke
  • Tube integrity is validated via a bi-directional 3,000 ft/lbs torque test
  • Computer balanced to less than a ? ounce/inch variance as an assembly


Fitment:
  • BMW X3M 2019-2024
  • BMW X4M 2019-2025


Note:
  • These shafts are balanced as an assembly and should add no significant vibrations as long as the pinion angle adjustment and proper install procedure is followed.
  • HOWEVER, This upgrade changes ALL the factory Guibos to solid aluminum versions. This CAN cause some drivetrain vibrations at certain RPMS, usually at certain speeds on decel. This is normal and can range from very mild to severe if any of the other drivetrain pieces are not in perfect alignment. We recommend Medium Threadlocker be used on all bolts and is included. Also, be aware, that these shafts ARE LARGER in diameter than stock. You MUST ensure nothing is rubbing on the shaft after installation. We cannot be responsible for damage to shafts if clearance is not checked.
Proposition 65

WARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov

Vehicle Make/Model
BMW X3 2004-2006 2.5i
BMW X3 2004-2006, 2008 3.0i
BMW X3 2007-2011 2.5si
BMW X3 2007-2011 3.0si
BMW X3 2009-2010, 2018-2024 xDrive30i
BMW X3 2010-2011 25i Top Line
BMW X3 2010-2011 25i M Sport
BMW X3 2010-2017 xDrive28i
BMW X3 2011-2017 xDrive35i
BMW X3 2011 25i Lujo
BMW X3 2011 30i M Sport
BMW X3 2012-2014 xDrive28i M Sport
BMW X3 2012 xDrive28i Lujo
BMW X3 2012, 2014 xDrive28i Top Line
BMW X3 2012-2017 xDrive35i M Sport
BMW X3 2014 xDrive35i Top Line
BMW X3 2015-2017 xDrive28d
BMW X3 2015-2017, 2021-2024 sDrive20i
BMW X3 2015-2016 xDrive35i X Line
BMW X3 2015-2017 xDrive28i X Line
BMW X3 2015-2017 sDrive28i
BMW X3 2018-2020 xDrive30i X Line
BMW X3 2018-2024 M40i
BMW X3 2018-2020 sDrive20i Executive
BMW X3 2019-2024 sDrive30i
BMW X3 2020-2025 xDrive30e
BMW X3 2020-2024 M Competition
BMW X3 2020-2024 xDrive30i Protection
BMW X3 2020-2024 M
BMW X3 2022-2023 xDrive30i Outdoor Edition
BMW X3 2024 xDrive30e Outdoor Edition
BMW X3 2025 M50
BMW X3 2025 M50i
BMW X3 2025 xDrive30
BMW X3 2025 M50 xDrive
BMW X3 2025 30 xDrive
BMW X4 2016, 2020-2025 M40i
BMW X4 2016 M Sport
BMW X4 2020-2025 M Competition
BMW X4 2020-2025 M
BMW X4 2022 xDrive30i

Check out these other great products