.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Toyota GR Supra
Select the year of your Toyota GR Supra:
THE DRIVESHAFT for the MK5 Supra! VTT Is proud to offer our Carbon Fiber Driveshaft for the A90/91 Supra made exclusively for us by PST one of the leading names in CF driveshaft technology! This driveshaft is made from 3.25" CF tubing Spicer 1350 Yolks, and U-Joints. All pieces are then bonded using PST's proprietary process, and balanced to within 1/8 In/Ounce. We couple the driveshaft with VTT Custom 7075 aluminum adapters, 4340 Rear end Adapter all which convert the 3-bolt BMW bolt pattern to the 4-bolt Spicer yolk pattern and one heavy-duty CV Joint.
ALL OF THE quickest and fastest Supra run this shaft, dont get stuck with a lower-strength broken shaft at the strip. Do it once, do it right for LESS!
PST uses its extensive experience to produce world-class carbon fiber components. We maximize torsional strength by using two different wind angles during the manufacturing process. This technique creates a driveshaft with less stress on the driveline.
SFI Certification: These carbon fiber driveshafts can be SFI-certified. If your plans require SFI certification, be sure to request this when ordering.
Made in the U.S.A
Kit Includes:
Features:
Fitment:
Note:
ALL OF THE quickest and fastest Supra run this shaft, dont get stuck with a lower-strength broken shaft at the strip. Do it once, do it right for LESS!
PST uses its extensive experience to produce world-class carbon fiber components. We maximize torsional strength by using two different wind angles during the manufacturing process. This technique creates a driveshaft with less stress on the driveline.
SFI Certification: These carbon fiber driveshafts can be SFI-certified. If your plans require SFI certification, be sure to request this when ordering.
Made in the U.S.A
Kit Includes:
- 1 VTT/PST CF Driveshaft
- 1 VTT 4340 Rear End Adapter
- 1 VTT Billet Adapter Tool
- 1 BMW Nut Repair kit
- 1 Rear 7057 Aluminum adapter
- 1 Front 7075 Aluminum adapter
- 3 M10 Rear flange bolts
- 3 M10 front flange bolts, and nuts
- 1 Small tube of Loc-tite medium thread locker
- Almost the same weight as the factory shaft while being many times stronger 15.2Lbs stock to 16 lbs VTT CF
Features:
- The shaft is bonded to an exclusive-design 7075 forge aluminum tube yoke
- Tube integrity is validated via a bi-directional 3,000 ft/lbs torque test
- Computer balanced to less than a ? ounce/inch variance as an assembly
Fitment:
- Toyota A90/91 Supra 2020-2025
Note:
- This upgrade changes ALL the factory Guibos to solid aluminum versions. This CAN cause some drivetrain vibrations at certain RPMS, usually at certain speeds on decel. This is normal and can range from very mild to severe if any of the other drivetrain pieces are not in perfect alignment. We recommend Medium Threadlocker be used on all bolts and is included
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Vehicle Make/Model | Year | Trims |
|---|---|---|
| Toyota GR Supra | 2020-2025 | Base |
| Toyota GR Supra | 2020-2025 | Premium |
| Toyota GR Supra | 2020 | Launch Edition |
| Toyota GR Supra | 2021-2022 | A91 Edition |
| Toyota GR Supra | 2023-2025 | Special Edition |
| Toyota GR Supra | 2023 | A91-MT Edition |
| Toyota GR Supra | 2024 | Premium 45th Anniversary Edition |
| Toyota GR Supra | 2024 | 45th Anniversary Edition |
| Toyota Supra | 2021 | Azul |
| Toyota Supra | 2021-2022 | GR |
| Toyota Supra | 2023-2025 | Base |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.