.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Ducati 1098
Select the year of your Ducati 1098:
Woodcraft Technologies is dedicated to manufacturing and distributing sport bike products that make sense! They offer a complete line of USA made Woodcraft Technologies parts including Rearsets, Clip-on/Hand Controls, Engine Covers, Frame Sliders, Axle Sliders, Bar-End, Sliders Hand Guards, Toe Guards, Race Handlebar Switches, Motorcycle Stands, Klucky Puck Knee-Sliders, Dual Temp Tire Warmers and more! Plus, Woodcraft Technologies is your exclusive US source for great brands like Hindle Exhaust, Armour Bodies Bodywork, Servo Buddy and Cycle Mount.
The Ducati ECU is equipped with an immobilizer. There is a sensor in the plastic ring that surrounds the keyswitch. The key must be secured in the middle of this ring. The ring can optionally be removed from the plastic cover and placed in an alternate location of your choice. The bike will not run without the key in this location unless you have an aftermarket ECU (Microtech or similar).
Exclusively available from Woodcraft. Our Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up valuable space for steering dampers and lap timers. The things you need go in the space you save. There is no longer a need for keys. The best thing about our Key Switch Eliminator is the ability to simply "Plug and Play". It installs in seconds and requires no modifications to your stock harness - no need to cut any wires! This means easy re - installation of stock components down the road.
Features:
The Ducati ECU is equipped with an immobilizer. There is a sensor in the plastic ring that surrounds the keyswitch. The key must be secured in the middle of this ring. The ring can optionally be removed from the plastic cover and placed in an alternate location of your choice. The bike will not run without the key in this location unless you have an aftermarket ECU (Microtech or similar).
Exclusively available from Woodcraft. Our Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up valuable space for steering dampers and lap timers. The things you need go in the space you save. There is no longer a need for keys. The best thing about our Key Switch Eliminator is the ability to simply "Plug and Play". It installs in seconds and requires no modifications to your stock harness - no need to cut any wires! This means easy re - installation of stock components down the road.
Features:
- Keyswitch Elimination Harness Assembly
- Ducati 1098 2007-2008
- Ducati 1098 R 2007-2011
- Ducati 1098 S 2007-2008
- Ducati 1198 2009-2011
- Ducati 1198 S 2009-2011
- Ducati 1198 SP 2008-2009
- Ducati 848 2008-2011
- Ducati 848 EVO 2011-2013
- For Racing Use Only
- FOR USA and EU MODELS
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Vehicle Make/Model | Year | Trims |
|---|---|---|
| Ducati 1098 | 2007-2008 | Base |
| Ducati 1098 R | 2008-2009 | Base |
| Ducati 1098 R Bayliss LE | 2009 | Base |
| Ducati 1098 S | 2007-2008 | Base |
| Ducati 1098 S Tricolore | 2007 | Base |
| Ducati 1198 | 2009-2011 | Base |
| Ducati 1198 R Corse | 2010-2011 | Base |
| Ducati 1198 S | 2009-2010 | Base |
| Ducati 1198 S Corse | 2010 | Base |
| Ducati 1198 SP | 2011 | Base |
| Ducati 848 | 2008-2010 | Base |
| Ducati 848 EVO | 2011-2013 | Base |
| Ducati 848 EVO Corse SE | 2012-2013 | Base |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.