.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Ford F-250
Select the year of your Ford F-250:
Improve traction on your 1999-2016 Ford F250 / F350 Super Duty 4WD Short Bed without limiting wheel travel with a BDS Recoil Traction Bar Mounting Kit, made with heavy wall construction and internal compression springs that can be loaded or unloaded while installed on the vehicle to control axle wrap. Full float design for bind-free performance and can be installed with a range of lift heights.
Fabricated from 2-inch OD x 3/16-inch wall steel tubing with a threaded bung welded in toward the axle and a CNC-machined end at the frame. Axle mount uses BDS's ultra-durable large-forged flex end and jam nut. Using a forged housing with large 1-1/4-nch x 12 threaded shank, a single sided snap ring and 1-piece flex ball, the flex ends are capable of up to 15 degrees of misalignment in either direction. At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings.
Features:
Fitment:
Note:
Fabricated from 2-inch OD x 3/16-inch wall steel tubing with a threaded bung welded in toward the axle and a CNC-machined end at the frame. Axle mount uses BDS's ultra-durable large-forged flex end and jam nut. Using a forged housing with large 1-1/4-nch x 12 threaded shank, a single sided snap ring and 1-piece flex ball, the flex ends are capable of up to 15 degrees of misalignment in either direction. At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings.
Features:
- Adjustable axle wrap control using dual-stage resistance springs
- Full floating traction bar design will not bind throughout the full range of wheel travel and/or hinder suspension articulation
- Spring preload can be adjusted on the vehicle without disassembling the traction bar
- Traction bar ends are greaseable and rebuildable
- Mounting brackets are bolt-on, only requiring minor drilling for frame mount installation
Fitment:
- Ford F250/F350 Super Duty Short Bed 1999-2016
Note:
- Fits short box models only
- Does NOT fit Dual Rear Wheel (DRW) models.
- Fits 0-6 inch of rear lift
- Will work with vehicles with factory rear sway bar
- Includes (1) 123409 Traction Bar Box kit & (1) 123408 Mounting kit
Other Part Numbers:
BDS Suspension #BDS2311-BLDV
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Vehicle Make/Model | Year | Trims |
|---|---|---|
| Ford F-250 | 1999-2009 | XLT |
| Ford F-250 | 1999 | Lariat |
| Ford F-250 | 1999 | Base |
| Ford F-250 | 1999 | XLT VIP |
| Ford F-250 | 1999-2009 | XL |
| Ford F-250 | 2004-2009 | Flotillera |
| Ford F-250 | 2007 | Doble Cab |
| Ford F-250 Super Duty | 1999-2016 | Lariat |
| Ford F-250 Super Duty | 1999-2016 | XL |
| Ford F-250 Super Duty | 1999-2016 | XLT |
| Ford F-250 Super Duty | 2004-2010 | Harley-Davidson Edition |
| Ford F-250 Super Duty | 2004-2016 | King Ranch |
| Ford F-250 Super Duty | 2008-2014 | FX4 |
| Ford F-250 Super Duty | 2009-2010 | Cabela's |
| Ford F-250 Super Duty | 2013-2016 | Platinum |
| Ford F-250 Super Duty | 2015-2016 | Base |
| Ford F-350 | 1999-2009, 2011-2016 | XLT |
| Ford F-350 | 1999-2009, 2011-2016 | XL |
| Ford F-350 Super Duty | 1999-2016 | XLT |
| Ford F-350 Super Duty | 1999-2016 | XL |
| Ford F-350 Super Duty | 1999-2016 | Lariat |
| Ford F-350 Super Duty | 2003-2016 | King Ranch |
| Ford F-350 Super Duty | 2004-2010 | Harley-Davidson Edition |
| Ford F-350 Super Duty | 2008-2009 | FX4 |
| Ford F-350 Super Duty | 2009-2010 | Cabela's |
| Ford F-350 Super Duty | 2013-2016 | Platinum |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.