.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
Our 6th Gen 4Runner Lo-Pro Winch Bumper delivers a clean, low-profile solution that integrates tightly with the factory body lines. It's designed to add winch and lighting capability while preserving the factory look and driver-assist systems of the new 4Runner.
The bumper is constructed with an 11-gauge steel outer shell, and a 3/16-inch steel winch plate and mounting brackets to handle recovery loads. 3/4-inch D-ring mounts are fully welded on both the front and back sides for maximum durability. The Lo-Pro is fully compatible with TSS, front camera, parking sensors, and driver-assist features. All trims are supported, though TRD Pro and Trailhunter models require minor trimming of the front skid for clearance. Installation requires cutting the center plastic portion of the factory bumper cover.
This is designed specifically for a Baja Designs S8 20-inch light bar, with confirmed compatibility for the Rigid 20-inch SR Series as well. Integrated light pockets accept a pair of Baja Designs S2 fog lights. Engineered to accept most 8K-12K winches, the Lo-Pro makes recovery-ready look clean and purposeful. Winches with relocatable control boxes fit best, while some integrated models may require minor trimming. Fitment has been confirmed with Warn Zeon XD 10-S / 12-S and Warn Evo 10-S / 12-S series winches. The bumper ships with all required mounting brackets and hardware. If a powder-coated option is not selected, the bumper must be painted or powder coated prior to installation to prevent corrosion.
Features:
Install Instructions:
Fitments:
Notes:
The bumper is constructed with an 11-gauge steel outer shell, and a 3/16-inch steel winch plate and mounting brackets to handle recovery loads. 3/4-inch D-ring mounts are fully welded on both the front and back sides for maximum durability. The Lo-Pro is fully compatible with TSS, front camera, parking sensors, and driver-assist features. All trims are supported, though TRD Pro and Trailhunter models require minor trimming of the front skid for clearance. Installation requires cutting the center plastic portion of the factory bumper cover.
This is designed specifically for a Baja Designs S8 20-inch light bar, with confirmed compatibility for the Rigid 20-inch SR Series as well. Integrated light pockets accept a pair of Baja Designs S2 fog lights. Engineered to accept most 8K-12K winches, the Lo-Pro makes recovery-ready look clean and purposeful. Winches with relocatable control boxes fit best, while some integrated models may require minor trimming. Fitment has been confirmed with Warn Zeon XD 10-S / 12-S and Warn Evo 10-S / 12-S series winches. The bumper ships with all required mounting brackets and hardware. If a powder-coated option is not selected, the bumper must be painted or powder coated prior to installation to prevent corrosion.
Features:
- Lighting & Winch Options
- Lo Profile Fitment
- 3/4in D-Ring tabs are fully welded on both the front and back sides
- Outer shell is made from 11 ga Steel
- Winch plate and mounting brackets are made from 3/16in Steel
- Unless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust
- Includes all Necessary Mounting Brackets & Hardware for Install
- Fitment:
- Designed to work with all trims, though TRD Pro & Trailhunter will need front skid trimmed to clear bumper
- Fully compatible with TSS
- Compatible with front camera, drive assist, and parking sensors
- Cutting of the center plastic portion of the factory bumper cover is required to install the bumper
- Add-Ons:
- Designed Specifically for the Baja Designs S8 20in Light Bar
- Also compatible with the Rigid 20in SR Series
- Light pockets for a pair of Baja Designs S2 fog lights. Other brands are not guaranteed to fit perfectly.
- Fits Most Winches without integrated control boxes. Winches with the ability to relocate control box recommended
- Confirmed fitment on Warn Zeon XD 10-S/12-S & Evo 10-S/12-S series winches
- Installation:
- This Installation Requires 2 People For Best Results
- Estimated 2.5 Hour Install (Without Wiring)
Install Instructions:
- For Instructions CLICK HERE
Fitments:
- Toyota 4Runner 6th Gen 2025+
Notes:
- This item has a 6-8 week lead time.
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Make Vehicle | Model | Year |
|---|---|---|
|
2025 Toyota 4Runner |
4Runner | 2025 |
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.