.jpeg?q=90&p=thumb&w=200&h=200)
.jpeg?q=90&p=thumb&w=40&h=40)
Brakes 
Driveline 
Electronics 
Handlebars & Controls 
Package Deals 
Wheel Accessories 
Wheels by Vehicle 
Tools and Maintenance 
Universal & Repair 
Vivid Racing Gear 
See more parts for Jeep Wrangler
Select the year of your Jeep Wrangler:
Motobilt now offers the Jeep JL Hammer Stinger front bumper with fog light holes. It features DOM steel tube stinger and built in provisions for factory style fog lights. The Motobilt Jeep JL Front Hammer Bumper is a 48.5 inch wide, sleek, tight-fitting design proudly made in the USA.
Our JL Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JL. The bumper will fit all 2018 and newer models of the Jeep JL 2 door and 4 door JL Unlimited. The front d-ring mounts are CNC cut from 3/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.
The Hammer Stinger bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle.
The main construction of the bumper is fabricated from 3/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JL Hammer bumper has bolt holes for a recovery winch.
Features:
Our JL Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JL. The bumper will fit all 2018 and newer models of the Jeep JL 2 door and 4 door JL Unlimited. The front d-ring mounts are CNC cut from 3/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.
The Hammer Stinger bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle.
The main construction of the bumper is fabricated from 3/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JL Hammer bumper has bolt holes for a recovery winch.
Features:
- Jeep JL Stinger Hammer 48.5 inch front bumper.
- Stinger made from 1 3/4 inch steel DOM tube and laser cut gussets from 3/16 inch steel.
- Fits 2018 and newer Jeep JL 2 door and 4 door JL Unlimited
- Fits 2020 and newer Jeep Gladiator
- Fabricated from 3/16 inch thick high strength steel plate
- Bolt on design
- 3/4 inch thick steel d-ring mounts
- Pass through d-ring mounts weld to the bumper
- Included Fog Light Holes
- Pre-installed riv nuts for 10-24 screws in the factory bolt pattern
- Made in the USA
- Sold as each
- Jeep Wrangler JL 2018-2020
- Jeep Gladiator 2020
- If installing a winch, MB1002 fairlead mount will also need to purchased. See Related Parts.
- Motobilt bumpers ship bare steel, paint or powdercoat needed before use.
- No cutting required on the frame rails on your Jeep JL
- LED fog light NOT included, but sold separately.
Proposition 65
⚠ WARNING:
Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
| Vehicle Make/Model | Year | Trims |
|---|---|---|
| Jeep Wrangler | 2018-2019 | Unlimited Moab |
| Jeep Wrangler | 2018-2020 | Sport S |
| Jeep Wrangler | 2018-2020 | Sport |
| Jeep Wrangler | 2018-2020 | Unlimited Rubicon |
| Jeep Wrangler | 2018-2020 | Unlimited Sport |
| Jeep Wrangler | 2018-2020 | Rubicon |
| Jeep Wrangler | 2018-2020 | Unlimited Sport S |
| Jeep Wrangler | 2018-2020 | Unlimited Sahara |
| Jeep Wrangler | 2019-2020 | Rubicon Deluxe |
| Jeep Wrangler | 2020 | Unlimited Rubicon Xtreme |
| Jeep Wrangler | 2020 | Unlimited Rubicon Deluxe |
| Jeep Wrangler JK | 2018 | Unlimited Sahara |
| Jeep Wrangler JK | 2018 | Sahara |
| Jeep Wrangler JK | 2018 | Unlimited Willys Wheeler |
| Jeep Wrangler JK | 2018 | Unlimited Rubicon |
| Jeep Wrangler JK | 2018 | Sport S |
| Jeep Wrangler JK | 2018 | Rubicon |
| Jeep Wrangler JK | 2018 | Sport |
| Jeep Wrangler JK | 2018 | Unlimited Sport S |
| Jeep Wrangler JK | 2018 | Unlimited Sport |
Motobilt was founded in 2012 by offroading pioneer, Dan DuBose and is located at Ozark, Alabama. The company specializes in creating aftermarket parts for various offroad vehicles and Jeeps. They have consistently provided high-quality products. Hence, they have become the brand of choice by multiple offroaders worldwide.
Proudly made in the USAAll of Motobilt’s products are made in the USA. With more than 40 professionals working in their 85,000 square foot facility, the company is able to maintain and control their high-quality standards and provide their customers with the best value for their money.
Making Use of Advanced TechnologyThe company uses state-of-the-art technology in creating their products such as Laser Cutters, Press brake forming, CNC machines, Tube Benders, MIG and TIG welding machines, and more. They utilize the latest 3D CAD Software to create precise and accurate designs that fit perfectly in the vehicle.
Their products are made out of the best raw materials available in the market. This helps in making their product strong and durable that it can handle the toughest terrain encountered during off-roading.
Purchase Motobilt Products at Vivid RacingIf you want to turn your vehicle into a reliable offroading machine, you need parts designed for the occasion and Motobilt is the brand for you. They offer suspension parts, bumpers, stiffeners, chassis reinforcement parts, billet products, and other offroad accessories. If you want a brand that you can depend on, then you came to the right place. Visit Vivid Racing and check out their list of products that would fit your specific needs.
Check out these other great products
Error: Failed to add product
Please refresh the page and try again.